Find out how to DIY a Customized Vary Hood for Underneath $50

Once I consider builder grade, the primary place I consider is the kitchen. Greater than every other space of the home, kitchens are typically on the high of everybody’s “what I wish to change about my dwelling” checklist. And the place to start out with taking your kitchen from builder-grade to lovely (since that’s sort of our factor)? With the cupboards!

All of it begins with portray (normally), however there are many nice choices past paint, too. Our visitor immediately is displaying how she upgraded her cupboards with a DIY customized vary hood (for underneath $50!):

Scroll down for Jill’s superior tutorial:

Hello everybody! I’m Jill from The Rozy Dwelling and I’ve been running a blog my means by a transform for the previous few months. I’m an enormous fan of Remodelaholic and have getting impressed from Cassity and the gang for the previous few years. Think about my shock after they requested me to do a visitor put up about my $50 Customized Vary Hood!

We purchased our home in 2010, two months after the beginning of our son, and I’ve been working continuous since then to make our home our dwelling. Once we walked into our dwelling the primary time, I checked out my husband and stated “nope.” However then one thing great occurred. We went outdoors on the higher deck and noticed the view.

Oh the view! I usually name it our little piece of heaven in the midst of the Texas hill nation. I took a minute, walked round the home and determined that I may make this place lovely. It had a very good format, the rooms have been giant and it had a ton of potential.

One of many first tasks we labored on was the kitchen. It appeared somewhat one thing like this once we purchased it.

The very first thing I did was paint the cupboards and take away that dreadful microwave from over the range. Why did I take away the microwave? Despite the fact that I do know there isn’t a show of it being a problem, I simply don’t like having a microwave buzzing subsequent to my head whereas I’m cooking. My resolution was to simply take it down and substitute it with a vent.

One of many questions/feedback I hear essentially the most is “What was improper with it like that?” or “It appeared fantastic prefer it was” That’s the factor – it appeared fantastic. Nothing spectacular – simply fantastic. Since our kitchen opens as much as our dwelling space, I have a look at it – so much! I needed extra character. Oh and did I point out that vent I bought match completely into the cupboards? So excellent, in truth, that I couldn’t plug it in. For the final two years I had no vent, and no mild.

Useful trace: When ordering a vent to make use of for this venture, ensure you order one a number of inches smaller (width and depth) than your cupboards. Looks like frequent sense, proper? However when you’re new to transforming/DIY issues that must be frequent sense aren’t all the time so black and white.

Additionally, somewhat word concerning the vent itself (as a result of boy have I gotten a ton of questions on this a part of it): you need to use an out of doors venting unit for this venture. The vent I chosen was recirculating as a result of that’s the means my dwelling was arrange. I had quotes to get an out of doors venting system put in however it was in extra of $1000 (the facet of our dwelling was stone so it will have required a masonry skilled along with plumbing/electrical). As a result of this tutorial is for the vary hood, the vent you utilize makes no distinction (recirculating or outdoors venting).

This put up comprises affiliate hyperlinks. Study extra and browse our full disclosure coverage right here.

Constructing the vary hood

Supplies

• 1 4X8 Birch Plywood Panel
• 1 X 2 X 8 Help Boards
• 1 x 3 X 8 Pine Board (for high face)
• 1 X 4 X 8 Pine Boards (for backside face)
• 2 8 foot lattice items: $7.28
• Liquid Nail: $2.52
• Trim Items: $8.52

Step by Step DIY Customized Vary Hood

Start by taking off the cupboard doorways and eradicating the underside of the cupboard. I additionally knocked out the entrance assist piece. Now you might be questioning why wouldn’t I simply take away the middle cupboard unit. I couldn’t. The facet and center cupboards are all one piece – bummer! In case you are fortunate sufficient to have a separate heart cupboard, all you need to do is take away that part.

I’m certain you seen I didn’t transfer the range (and even the tea kettle). My husband cracked the cooktop final yr so it solely has one functioning burner. Please, please, please transfer or no less than cowl your range previous to doing this venture.

After demoing and cleansing, determine how far you need the hood to venture out. I performed with a number of various lengths earlier than choosing 16 inches. Subsequent, float within the two facet helps, degree them up and fix them to the adjoining cupboards utilizing a nail gun.

Add the back and front helps.

Bear in mind how I stated the vent match simply completely? Properly due to that I needed to connect the vents to the facet of the helps. Since all of you’ll be buying a vent that’s smaller than the area supplied, I might advocate doing the next:

Measure the width of your cupboards within the entrance and the again (they need to be the identical, however generally they are often off by a 1/2 inch or so).

Lower two assist beams to this width.

Subsequent, reduce two assist beams to the general size you selected for the vary hood (for me it was 16 inches).

Connect the helps collectively, making a field body. Do that outdoors of the cupboard area (in your workshop). 

Subsequent, reduce a 3/4 inch thick piece of plywood to the general width and size of the completed field body. Set the vent on high of the plywood and draw a top level view. Lower out the outlined part. Connect the plywood to the underside of the field body. 

Connect the field body to cupboard.

Now we’re all on the identical web page!

Connect the vent to the helps.

Set up the vent (ie plug it in, connect the skin venting, if wanted, and so on).

Subsequent, add a entrance face to the underside assist. It must be roughly 1/2 inch longer than the assist and must be mitered to 45 levels on each ends.

Subsequent measure the quantity of uncovered helps on the facet and reduce a face entrance for either side (once more with mitered edges).

Connect a thinner face entrance to the highest of your cupboard body (the highest face entrance is similar size as the underside face entrance and also needs to be mitered on the ends).

Relying on how far your high face entrance stands out, you’ll need to chop facet face fronts for the higher part as effectively.

Measure the size between the highest and backside face entrance and reduce three helps beams to that dimension. Connect them to the again of the face fronts (I mitered the ends of the boards in order that they’d connect simply behind the face fronts).

After including the helps, measured the open space from the skin of the left assist to the skin of the appropriate assist and from the highest face entrance to the underside.

Utilizing these measurements, reduce out a plywood sq..

Connect the plywood to the helps utilizing a nail gun.

As a result of the hood is slanted, the plywood ought to sit proper behind each the higher and decrease face fronts.

Subsequent, decide the angle of the facet items. For lack of a greater possibility, I folded a bit of cardboard over the facet after which reduce the cardboard to dimension.

Utilizing the nifty cardboard template, hint out the sample on a bit of plywood and reduce. Connect to helps utilizing a nail gun.

Mine weren’t excellent however they didn’t have to be (the lattice and caulk will cowl up the sides).

After attaching the perimeters, sand the whole vary hood.

Subsequent, reduce two items of lattice to the width of the middle plywood space (ensuring to miter them on the sides).

Measure the size between the higher and decrease lattice piece and reduce 5 items of lattice to this size. Connect in equally spaced segments throughout the entrance of the plywood. Ensure you have a bit of lattice on every edge – this may assist “disguise” these imperfect facet items. 

For you budget-savvy DIYers, right here is how the associated fee broke down.

• Birch Plywood Panel: $10.67
• 1 X 2 X 8 Help Boards: $2.61
• 1 x 3 X 8 Pine Board (for high face): $5.43
• 1 X 4 X 8 Pine Boards (for backside face): $8.64
• 2 8 foot lattice items: $7.28
• Liquid Nail: $2.52
• Trim Items: $8.52
• Complete: $45.67!

Word: This doesn’t embody the crown moulding. I used to be changing all of that on my cupboards anyway so I already had it readily available.

Jill, I like it! What a fantastic replace for such a small funding, each money and time. I like kitchens with character!

Pay Jill a go to at The Rozy Dwelling and see all the opposite nice issues she’s doing in her dwelling!

UPDATE: Jill painted her vary hood to appear like the attractive farmhouse type steel vary hoods. So attractive! Try the main points right here.

take a look at these different nice methods to indicate your kitchen cupboards some DIY love:

Add Crown Molding to Cupboards

The molding provides a contact of magnificence and class to the kitchen, and it’s a good way to replace the look of your cupboards with out spending some huge cash.

Glass-Entrance Cupboard

The cupboard doorways add a contact of magnificence with their clear traces and gleaming glass, whereas the open cabinets present a glimpse of the stunning dishware inside.

Customized Plate Rack Cupboard

This can be a implausible concept for repurposing an outdated cupboard into a trendy and useful plate rack!

Exchange Cupboards With Open Shelving

Changing cupboards with open shelving immediately opens up this kitchen, creating an airier and extra inviting really feel. The combo of wooden tones and white accents provides heat and visible curiosity.

Construct a Customized Vary Hood with Hidden Storage