
Bed room Suite Progress Report – Sanding The Purple Oak Hardwood Flooring (Plus, A Preview Of My Blue Stroll-In Closet With Gentle Wooden Flooring)
This site contains affiliate links. I may earn a small commission, at no extra cost to you.
I made a ton of progress yesterday on sanding the purple oak hardwood flooring in our bed room suite! I didn’t get them completed. I’d guess that I’m about midway by with the entire course of. I began with 36-grit sandpaper since I’m eradicating a extremely darkish end, and I didn’t even get by that complete course of yesterday. However that’s the toughest half (I’ll present you why in a bit), so the remaining ought to go a lot quicker. As soon as the entire unique end is off, I’ll observe up with 60-grit, 80-grit, after which finish with 100-grit.
This type of feels anticlimactic at this level. In spite of everything, it was simply over two months in the past that I had these hardwood flooring put in, and at the moment they appeared like this…

After which I stained and polyurethaned them, they usually appeared like this…


So undoing all of that tough work and going again to the purpose the place I used to be simply over two months in the past doesn’t actually really feel like progress. However I do know when all is alleged and finished, I’ll be so completely satisfied that I took this chance to alter the ground colour, not solely in our bed room suite, however all through our total home.
Anyway, I rented two ground sanders from House Depot. Our House Depot rental division is pretty new, so this was my first time to lease from House Depot. And I’m so glad I did! The explanation I didn’t sand my very own flooring the primary go ’spherical (when the flooring was put in earlier this yr) is as a result of I remembered sanding the flooring in the remainder of the home years in the past, and it not a enjoyable course of. I rented these sanders from a spot known as Sunbelt right here in Waco, and the drum sander was laborious to make use of and created a ton of mud that was thrown into each nook and cranny in each room. The sting sander was terrible and virtually unattainable to make use of, with the sanding disc flying off and throughout the room after going only some ft. I bear in mind being in tears over that edge sander.
I didn’t wish to undergo that once more, so earlier this yr, I employed out the sanding of the hardwood flooring. However had I identified how superior House Depot’s sanders had been, there’s no means I’d have employed out that job! These American Sanders ground sanders are straightforward to make use of, and I used to be particularly impressed with the sting sander. (Tiger appeared impressed as effectively. 😀 )


Talking of Tiger, he’s doing rather well. I put a collar with an air tag on him in order that I can hold tabs on him. 😀 He just about spends all of his time in our again yard, and I’m on the market fairly often to provide him a lot of love and cuddles.


Anyway, right here’s the sanding progress. I received the entire sanding with the 36-grit sandpaper on the drum sander finished in the entire areas. After which I received about midway finished with the sting sanding with the 36-grit sandpaper.


The areas across the doorways are clearly essentially the most difficult elements, and I might want to get new blades for my ground scraper to be able to get proper as much as the door jambs. Since I’m going from actually darkish flooring to a extremely gentle end, I clearly need each single little bit of that darkish end gone as a lot as doable. And I’d like to do this with out eradicating any extra trim items, if doable.


Fortunately, with the superior edge sander, the areas proper up towards the partitions are a lot simpler than I anticipated. I’ll nonetheless have to make use of a ground scraper within the corners, although, for the reason that spherical edge sander can’t get into these corners.


However I received the entire important space of the lobby finished. My greatest concern is the transition between the bed room suite lobby and the music room. That must be a clear, straight line for now (till I refinish the remainder of the flooring sooner or later), and I’m not fairly so assured in my capability to get a clear, straight line, even with a ground scraper. I’ll do my greatest, clearly, however I may need to dwell with a not-so-perfect transition for some time.


Anyway, the explanation that the primary sanding takes so lengthy is as a result of that darkish end must be faraway from the entire wooden grain. With only one move, it appears to be like like this…


And clearly, that gained’t do. After I was attempting to determine what end and which merchandise to make use of to get a lightweight end on purple oak hardwood flooring, I watched as many movies as I may discover on YouTube, Instagram, and TikTok. I got here throughout one video of a younger lady who DIYed her flooring, and she or he didn’t sand sufficient to take away the entire end from the grain. The consequence wasn’t nice. I assumed perhaps she simply didn’t know what purple oak flooring had been alleged to appear to be once they’re totally sanded. Perhaps she thought that purple oak flooring simply naturally have actually darkish grain, however they don’t. In the event that they’re sanded correctly, purple oak flooring have fairly light-colored grain. Any actually darkish grain is leftover stain, and it must be eliminated.


So getting all of that up is the most important problem on the primary sanding. As soon as all of that’s up, the remainder of the sanding (the 60, 80, and 100-grit sanding) ought to go fairly rapidly.


I’ll be utilizing Bona NaturalSeal on the flooring, and that sealer has a little bit of white pigment added to it. So as soon as they’re fully finished, the completed flooring must be only a bit lighter than they seem of their fully pure, unfinished state.


One other problem is that this complete little hallway between the lobby and the bed room must be finished with the sting sander as a result of there’s not sufficient room to make use of the large drum sander there since I’ve to sand with the grain of the wooden. That doesn’t seem to be an enormous hallway in any respect once you’re taking a look at it, however once you’re bending over and utilizing a robust edge sander to sand the entire thing, it appears a lot greater than it’s. 😀


I additionally seen that I’ve a number of areas that I already sanded, however clearly I didn’t do sufficient. So as soon as I end up with the 36-grit sanding, I’ll give the entire flooring a once-over and return and hit the areas that I missed earlier than shifting on.


I estimate that I can get by the entire sanding with the opposite three grits of sandpaper, as much as 100-grit, in the identical period of time that it took me to do the entire flooring with the 36-grit. So the toughest half is sort of over.
However right here’s the enjoyable half. We are able to lastly get an concept of what my blue walk-in closet will appear to be with gentle hardwood flooring. Once more, the completed flooring will likely be a tiny bit lighter than what they appear to be right here, however simply have a look at this big distinction the sunshine flooring make!


Isn’t that going to be fairly?! I’m so glad I made a decision to take this chance to alter the ground colour! Right here’s a reminder of what it appeared like with the (very dusty) darkish ground.


I imply, the sunshine ground makes such an enormous distinction within the room!


And this time round, I’m additionally going to take time to fill in areas like this with purple oak wooden filler. I didn’t do this the primary time round as a result of they didn’t present with a extremely darkish stain colour. However with a lightweight, pure ground colour, they’ll positively present.


As anxious as I’m to get these flooring completed, I need them finished proper, and I need them to be as good as doable once they’re completed. I’ve the sanders for yet one more day, so I must get by with the entire wooden filling and sanding earlier than I’m going to mattress tonight. After which I’m hoping to get began on the sealer tomorrow morning, after which topcoat tomorrow afternoon. If all goes as deliberate, I ought to have completed flooring to indicate y’all on Monday!